A SYSTEMS DMP801, Руководство пользователя

Страница: 14 / 42

12
DMP801
English
Mix Matrix
This is where it all happens� Each of the 8 input channels
and the 8 matrix inputs can be tweaked before being sent
to the main output�
Attenuation: Adjust the input level of each of the individual
input signals or matrix mixes�
Panning: These will let you adjust the left/right mix of the
incoming signals�
ALC: This button will assign the DMP801’s Automatic
Level Control to the corresponding input (channel in,
matrix in).
Duck:
Pushing this button will apply the ducking feature to
the corresponding mix�The duck function can be activated
as ducker 1, ducker 2, or off, the settings of which are
decided by their respective menus�
INV:
This button will invert the phase of the corresponding input or matrix signal�
On: This button allows you to turn the corresponding input signal on and off�When turned off, the signal will not be sent to
any of the matrix outputs selected�
Routing: Each of the 8 analog inputs and matrix inputs can be assigned to the DMP801’s output mix�
Signal Generator
The Channel Inputs and Matrix Output can have a signal generator applied to them� The option can be found in the
Channel In Matrix and Mix Matrix pages� The signal generator can be activated with the “ON” buttons and assigned to the
appropriate mixes using the matrix/channel select section below the controls�
There are 4 different signals available, including White Noise and Pink Noise – ideal for setup of systems – and sine and
sweep waves – for testing of equipment and for general setup purposes�
Sine:
The sine wave can be selected between 20 Hz and 20 kHz� The signal level can also be adjusted, and the signal can
be turned on and off�
Sweep: When using the sweep wave, a lowest and highest frequency can be selected� The sweep wave will move between
these frequencies and small increments� The hold time for each frequency can be selected by the users� There are also
controls for adjusting the signal level and turning the sweep wave on and off�
Pink Noise: The pink noise function includes level controls and on/off button�
White Noise: Like the pink noise, the white noise only offers level controls and an on/off button�