A SYSTEMS DMP801, Руководство пользователя

Страница: 15 / 42

13
DMP801
English
Control Panel
The control panel menu offers complete control of input
channels� This menu includes level and gain controls,
metering, and a host of other parameters that can be
edited�
Channel Name: A preselected channel name can be
viewed or edited in this screen�
Fader: The input level can be adjusted using this onscreen
fader�
Meters:
The input and output signal level of the channel
can be viewed through these meters� They can be adjusted
between pre- and post-fader meters�
Gain Reduction: The gain reduction meter will provide
a real-time indication of any reduction in gain applied by
the internal DSP processes of the DMP801 (including
compressors-limiters, equalizers, etcetera).
Limiter: This button will activate the internal limiter function for the corresponding channel�
Duck:
Activate the ‘ducking’ feature by pushing this button� The duck function can be activated as ducker 1, ducker 2, or
off, the settings of which are decided by their respective menus�
INV: This button will invert the phase of the corresponding signal�
CH ON: This button will turn the corresponding channel on and off�
Network
Networking Settings
When using the DMP801 remote software – either within
the local area network or through the internet – the network
settings need to be set appropriately to allow external
computers to identify and connect to it�
As described above, the host bits of IP address of DMP801
can be set via hardware (combination controls on the rear
panel) and software (control software).
Set via Hardware
When the IP address is set by hardware (the PIN2 of
the DIP switch is set to ON, and PIN3 and PIN 4 are set
properly based on your network environment), the screen
of the Network will be like below�
Device Name: The name of the current device is found
here� This can be adjusted by the user if necessary�
IP Address: The actual IP address of DMP801 will be shown here�
The Network bits of the IP address is recognized automatically and the host bits of the IP address is configured via the
combination controls on the rear panel manually�