A.O. Smith CAHP-MC-38, Инструкции по установке, эксплуатации и обслуживанию

Страница: 37 / 58

Clear Faults History
Operation Display Description
Move to “
CLEAR FAULTS HISTORY
”
by pressing the Up/Down button,
then press SELECT button to start
this clearing process.
The “ CLEAR FAULTS HISTORY ”
interface will be displayed
subsequently. Press YES button to
excute the clearing or press the
NO button to cancel the clearing.
The clearing command will be
sent to the MCB of the central
controller if the YES button is
pressed in the previous step and
the UIM will display “COMMAND
SENDING
…
”
The clearing is successful if
the UIM display
“SUCCEEDED!”.
If the UIM display
“FAILED!”, it indicates the
clearing is unsuccessful,
please check the
communication
between the control board
and the display board of
the central controller.
Press BACK button to return to
the previouse UIM interface.
CLEAR FAULTS HISTORY
CLEAR ALL THE
FAULTS HISTORY？
SUCCEEDED！
CLEAR FAULTS HISTORY
CLEAR ALL THE
FAULTS HISTORY？
COMMAND SENDING…
USER SETTING
USER PUMP ON TIME 20min
AUX HEAT AT H-AMBT OFF
CLEAR HEAT PUMP FAULTS
CLEAR FAULTS HISTORY
CLEAR FAULTS HISTORY
CLEAR ALL THE
FAULTS HISTORY？
USER SETTING
USER PUMP ON TIME 20min
AUX HEAT AT H-AMBT OFF
CLEAR HEAT PUMP FAULTS
CLEAR FAULTS HISTORY
YES NO
SELECT BACK HELP
SELECT BACK HELP
BACK
HX CLEAN RESET T
HX CLEAN RESET T