A.O. Smith CAHP-MC-38 Скачать руководство пользователя страница 26

Страница: 26 / 58

6.2.

UIM Interface Introduction

The UIM interface includes two pages of display, the main page and the secondary page. The two pages

could be switched by pressing the UP/DOWN buttons. The UIM will display the main page as default.

Press the UP or DOWN button to go to the secondary page. If there is no operation for 10S when the

secondary page is displayed, the UIM will return to the main page automatically. Please refer to figure

3-1 for the details of the main page interface layout and contents.

Interface Description – Main Page

Area

Content

Function Description

Area①

Controller Title

Display the controller title.

Area①

Hot water

System

Parameters

TANK TEMP

Display the current tank temperature. Display the upper tank

temperature. It will display the control temperature, which is the lower

tank temperature if there is a control temperature fault.

AMBIENT

TEMP

Display the ambient temperature, which is the average value of the

ambient temperatures from all the heat pumps. It will display “

-10

℃

” if all the heat pump units have the ambient sensor fault.

HEAT PUMP

Display the current status of the heat pump units. There are totally six

status,

which

are:

“OFF”,

“HEATING”,

“DEFROST”,

“ANTI-FRZ”

(Anti-Freezing), “STANDBY” & SWITCH”.

AUX HEATER

Display the status of the auxillary heating equipment.

If the hot water system is installed with a auxillary heating equipemtn, it

will display the current status of the auxillary heating equipment. There

are totally three status, which are: “ON”, “STANDBY”, “OFF”.

If the hot water system is not installed with a auxillary heating

equipment, it will display “NONE”.

Auxiliary Heating Anti-Freezing Display:“ANTI-FRZ”.

FAULT INFO

Display the error Informations of the centrall controller and all the heat

pump units.

The error codes will be displayed alternatively with 2 seconds shift if

there are more than one error codes.

Please refer to the “error code table” for detailed description of the

errors.

A.O.SMITH HOT WATER SYSTEM

ON FUNC HELP

TANK TEMP 50℃

AMBIENT TEMP 22℃

HEAT PUMP STANDBY

AUX HEATER STANDBY

FAULT INFO NONE

TIME

MON

①

②

③

④

Picture 6.2 Main Page Layout & Display Content

Содержание CAHP-MC-38



























































Результаты поиска

Содержание CAHP-MC-38

Отзывы:

Похожие инструкции для CAHP-MC-38

Бренды по названию

Популярные бренды

A.O. Smith CAHP-MC-38, Инструкции по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание CAHP-MC-38

Отзывы:

Похожие инструкции для CAHP-MC-38

Бренды по названию

Популярные бренды