A-LINK WNAP4G User Manual
35
Connect-on-demand: The device
won’t try to connect to Internet until LAN
PCs or devices try to go to Internet. Once Internet connection is established,
this device will drop the connection if maximum idle time is reached.
Manually: The device
won’t try to connect to Internet until users press
“connect” button at Status page. Once Internet connection is established, this
device will drop the connection if maximum idle time is reached.
h.
Maximum Idle Time
: the time of no activity to disconnect your L2TP
session. Set it to zero or enable “Auto-reconnect” to disable this feature.
i.
Maximum Transmission Unit (MTU)
: Most ISP offers MTU value to users.
The default MTU value is 0 (auto).
j.
IGMP Proxy:
Enable this feature allows multicast stream (e.g. IPTV
stream) to pass-through this device.
Note.
The items with * above are only available when choosing Static IP
Address in IP mode.
4. Combo WAN Setting
With Combo WAN feature, you can choose one primary WAN connection, and
set another WAN connection for backup. Otherwise, you can also choose
“Load Sharing” to use Ethernet WAN and 3G WAN simultaneously. The combo
WAN status will be showed at Internet
Setup page. Press “Settings” button to
configure this feature.
