A-LINK WNAP4G User Manual
54
3.3
Routing
3.3.1 Static Routing
If you have more than one routers and subnets, you will need to enable routing
table to allow packets to find proper routing path and allow different subnets to
communicate with each other. The routing table allows you to determine which
physical interface addresses are utilized for outgoing IP data grams.
Static Routing
: For static routing, you can specify up to 8 routing rules. You can
enter the
destination IP address
,
subnet mask
,
gateway
, and
hop
for each
routing rule, and then enable or disable the rule by checking or un-checking the
Enable checkbox