A-LINK WNAP4G User Manual
25
Manually: The device won
’t try to connect to Internet until users press
“connect” button at Status page. Once Internet connection is established, this
device will drop the connection if maximum idle time is reached.
o.
Allowed Connection Time:
You can limit WAN connection in a period of
time if required.
p.
Keep Alive:
There are three options for keep alive feature as below.
Disable: Disable keep alive feature.
LCP Echo Request: The device will constantly send LCP packets for
keeping alive. Enter the time interval and the maximum failure count.
Ping Remote Host: Enter the Remote host IP address and the time interval
to send the ping packets for keeping alive.
q.
NAT Disable:
You can disable NAT feature if required.
r.
IGMP Proxy:
Enable this feature allows multicast stream (e.g. IPTV
stream) to pass-through this device.
Note:
The items with * above are only available when choosing Manual for
Dial-up Profile.
B. iBurst
Note:
Users need to insert USB modem card for iBurst WAN connections.
