A-LINK WNAP4G User Manual
40
3.1.2.3
PPPoE
1.
PPPoE settings:
You need to type username and password of PPPoE
connection. The service name is only required when ISP asks you to input it.
MTU is 1492 by default.
2.
LAN IPv6 address settings:
You can add LAN IPv6 address, and IPv6
Link-Local address will be showed automatically.
3.
Address auto configuration setting:
Disable or enable this auto
configuration setting. You may set stateless or stateful( Dynamic IPv6), and
also check if need to send Router advertisement messages periodically.
3.1.2.4
When “6 to 4” is selected, you need to do the following settings.
1.
6 to 4 Settings
: you may obtain IPv6 DNS automatically or set DNS