9dot GigaSync, Руководство пользователя

Страница: 41 / 46

41
GIGASYNC MANUAL VER. 3 REV. 1
Each port has the following information:
The interface shows the name and status of the ports and the graph of the load that each connected device is
consuming.
In the case of a PoE module, it shows the type of GigaKey installed on each port (in the case of the previous figure, the first
three ports have the GigaKey: 9.Sync, while the last has Mode A + B). If the key has been entered incorrectly, the
corresponding port will say: "wrong side". If the key is not inserted or is partially inserted, it will say: "missing".
In the case of a PoE module with synchronization, it also shows the type of synchronization, if selected (Canopy Sync,
Cambium Sync). If it is not selected, it will show “Off”.
Information Description
Name Modifiable according to your needs
Status Depending on the condition it can be in On, Off, or Error.
Keys Type of GigaKey key inserted; "missing": does not have GigaKey; “wrong side”: inserted in the wrong
direction
Sync Synchronization method chosen
Load The trend over time of the output current
Actions
Under the heading "Actions" various functions are accessible for each port, which allow you to manage the individual
outputs:
Functions Description
Turn on / Turn off Alimenta se è spenta / Disalimenta se è accesa, togliendo tensione
Blink port Verifica il funzionamento del led della porta, provando ogni colore
Power cycle port Spegne e riaccende l'uscita in automatico
Sync port Solo nelle cartucce PoE-CS e TER-CS, consente di abilitare il tipo di sincronia desiderato
Rename port Rinomina la porta, per una migliore comprensione dell'impianto
Figura 24 - POE-CS cartridge information