9dot GigaSync, Руководство пользователя

Страница: 12 / 46

12
GIGASYNC MANUAL VER. 3 REV. 1
Terminal’s cartridge with synchronization: GS-G-TER-CS
As can be seen in the previous images, each GS-G-TER-CS cartridge is made up of 4 4-pole terminals. This cartridge is
compatible with GS-B-V2 and GS-B-V3.
The GigAdapter
3 can be placed in each terminal to convert it into an RJ45 port that will provide voltage and sync.
Each terminal has a signaling LED that provides information on the status of the port, on any faults, and if Cambium Sync
synchronization is active or not.
Each connector can be removed from the terminals for easier manipulation.
Through the main connector located behind, the module is connected to the internal electronics of the GigaSync.
3 See the section “GigAdapter”
Figure 7 - Multiple views of the GS-G-TER-CS cartridge
1
Terminal’s cartridge
with sync-over-power
Handle for module
extraction
2
ISOMETRIC VIEW
3
LED indicators
4
4 poles terminals
FRONT VIEW
5 Main connector
SIDE VIEW
REAR VIEW