38
f. To remove, take something like a flat tipped screwdriver then push
the fuse holder in slightly while simultaneously twisting to the left
(in the direction of the arrow on the holder). The holder will pop
out. Simply slide it straight outward.
g. Once removed, it will look like this:
h. When replacing the fuse, one end may sit more snugly than the
other – put this end into the holder. Next, slide the holder with fuse
end first into the IP Switch. Again, you will need to push slightly
and twist, this time to the right.
6.
How to Confirm Auto Reset function is working:
In order to simulate an
outage [to make sure the Switch is resetting properly] unplug the Ethernet
cable from the WAN port of your router. OR, if you have an all-in-one
modem/router, unplug the cable that’s connecting your cable or DSL line to
the modem/router. If you simply remove the LAN cable from the Switch itself,
(which is the incorrect way of testing), then the timeout is detected based on
“
Set Ping Frequency
” multiplied by “
Number of Continuous Timeout
”. The
system will ignore ‘
Timeout based on Website / IP Address
’ as it’s not
relevant anymore.
