23
*NOTE:
Power Delays also apply to scheduled or manual resets. Only outlets that
are currently powered on will power cycle upon an auto reset.
iii.
Timeout Settings
Timeout for Each Website / IP Address
Assigned websites must respond within this time or it is considered a timeout.
Set a larger value to allow for occasional Internet lags.
Default is 5 seconds.
*NOTE:
A larger timeout will allow for instances of delay or lag from target sites.
Number of Continuous Timeout
Number of continuous failed responses from assigned websites before the UIS
reset is triggered.
Default is 4 times.
Set Ping Frequency:
Administrator can set the website ping or connect interval (i.e. how frequently
the Switch pings the target sites).
Default is 10 seconds.
Ping Delay After UIS Reset:
Set how long the Switch waits after a UIS reset BEFORE it starts checking for a
connection again.
Default is 5 minutes.
Number of UIS Resets:
Set the number of UIS reset attempts when Internet connection is lost (e.g.
When set to 5 times: if connection is not restored after the 5th attempt, Switch
will wait in idle state until connection comes back).
Default is 1 time.
Force UIS Reset after Initial power-on:
Force the outlets to reset if all sites are unreachable after power-on (e.g. Router
boot failure after a power outage). Only outlets that were ON (before power off)
will reset. UIS function MUST be enabled for this to work.
Default is Enable.
4.2.2 Schedule
This option allows the user to schedule the power on / off / reset for each of the two
outlets. A total of 20 schedules can be assigned.
