4Ddoors 4DS2 v1, Инструкция по установке и руководство пользователя

Страница: 26 / 44

26
9. TRANSMITTER PAIRED BUTTONS
RECOGNITION FUNCTION SETTING
a. Press and hold the
SET
button to enter this function
setting until “9” appears on the display then release the
button.
b. Press the
SET
button again. The unit is now in paired
buttons recognition function adjustment mode. And
then you will see a figure “1” with flash dot appears on
the display.
c. Press
UP / Down
button once to select if you want the
top and bottom pairs of buttons control one opener each,
or each separate coded button to control the opener.
Figure “0” means the buttons recognition function is
closed. It means if you coded 1 button with 1 opener,
then its top or bottom pair will also control the opener.
It’s convenient for the users who only have 1 automation
door at home.
Figure “1” means the buttons recognition function is
open. If you coded first button with first opener, then
the first button will be the only button on the remote can
control the opener. It’s convenient for the users who have
more than 1 automation doors/gates at home.
d. Press the
SET
button to confirm the set and it will back
to standby status automatically and display “ll”.
NOTE :
1. The buttons recognition is set on “1” as standard in factory.
2. After you changed the buttons un-recognition into
recognition, please notice that only the coded button can
control the opener.
PROGRAMMING INSTRUCTIONS
BUTTON
RECOGNITION
FUNCTION IS
CLOSED
BUTTON
RECOGNITION
FUNCTION IS
OPEN