4Ddoors 4DS2 v1, Инструкция по установке и руководство пользователя

Страница: 19 / 44

19
2. OBSTRUCTION FORCE ADJUSTMENT
CAUTION: The obstruction force adjustment is set
automatically during programming. Normally no
adjustment is necessary.
a. Press and hold the
SET
Button until “1”appears on the
display, next press the UP Button until “2” appears on
the display to enter this function setting then release
the button.
b. Press the
SET
button again, The unit is now in force
adjustment mode. And then you will see a figure “3”
with flash dot appears on the display.
c. Press the UP button to increase the force setting or the
DOWN
button to decrease the force setting.
d. The minimum force is “1” and it can be adjusted upward.
The maximum force is “5”.
Press the
SET
button to confirm the set and it will back to
standby status automatically and display “ll”.
NOTE : The force is set on “3” as standard in factory.
PROGRAMMING INSTRUCTIONS
INCREASE FORCE
DECREASE FORCE