4Ddoors 4DS2 v1, Инструкция по установке и руководство пользователя

Страница: 14 / 44

14
3 Parts Steel Track
1.
2-Parts Track:
Per Fig.6, slide the A rail into the sleeve then, slide the B rail into the
sleeve.
3-Parts Track:
Per Fig.7, slide the C rail into the sleeve, slide the D rail into the sleeve;
slide the E rail into the sleeve.
2. Cut the plastic thread and; pull the screw rod along with inner chain to
the end rail position shown in (Fig.8)
3. As Fig.9, release the nut & spring.
4. Tighten the nut to the right position as shown in Fig.10, cut the plastic
tape, cut the plastic thread on sprocket, then rail assembly is finished.
FIGURE 7
C: 1000 MM D: 1000 MM E: 1000 MM SLEEVE SLEEVE
FIGURE 8
FIGURE 9 FIGURE 10