4Ddoors 4DS2 v1, Инструкция по установке и руководство пользователя

Страница: 20 / 44

20
3. TRAVEL SPEED SETTING
CAUTION: If you changed the speed again, it will cancel
the previous travel limit. The speed adjustment function
will be available only after you reset the travel limit.
a. Press and hold the
SET
Button until “1”appears on the
display, next press the UP button until “3” appears on
the display to enter this function setting then release
the button.
b. Press the
SET
button again. The unit is now in speed
adjustment mode. And then you will see a letter “A”
with flash dot appears on the display.
c. Press the UP & DOWN button to choose the speed.
Figure “8” means the 80% of the travel speed. Figure
“A” means the full speed.
d. Press the SET button to confirm the set and it will back
to standby status automatically and display “ll”.
NOTE
: The travel speed is set on full speed “A” as standard
in factory.
PROGRAMMING INSTRUCTIONS
INCREASE SPEED
DECREASE SPEED