VISIX SOLUTIONS | VX-2S-OP-30X QUICK START GUIDE | p.20
3.2.1
ACTIVATING THE CAMERA
When setting up the camera for the first time, the camera must be activated by creating a complex password. This is
a standard security practice and is required for access to the device. To activate the camera:
Steps:
1.
Launch the utility.
2.
Click
Detect Online Devices / Change IP Address.
Figure 3-3
: 3xLOGIC Camera (VISIX IP) Setup Utility
3.
Select the camera from the list of online devices.
4.
If you are configuring the camera for initial setup, click
Activate
to assign a new password. This step is required
for security purposes and must be completed before continuing. If the camera has previously been configured
and activated, skip to the next section.
3.2.2
IDENTIFYING AND CHANGING THE IP ADDRESS
1.
Once you have assigned a complex password to the camera, click
Change IP Address
and change the IP address
and subnet mask to the required values as defined in your site setup plan. Save the settings.