3xLogic VX-2S-OP-30X, Быстрый старт, Страница: 18 / 26

VISIX SOLUTIONS | VX-2S-OP-30X QUICK START GUIDE | p.18
Screw Holes
Cable Hole
Figure 2-36
Secure the Mounting Base
7).
Route the cables for the speed dome. Align the bottom of the speed dome with the mounting base.
8).
Line up the direction of the arrow with the spring end of the mounting base.
9).
Push the speed dome upwards and then forwards in the direction of the arrow. When the speed dome is
placed in position, the spring will automatically snap into the lock clip firmly as shown in Figure 2-37.
Line up
Push Forwards
Push Upwards
Figure 2-37
Attach the Back Box to the Mounting Base
4.
Remove the protective film on the bubble after the installation is finished.