VISIX SOLUTIONS | VX-2S-OP-30X QUICK START GUIDE | p.17
Figure 2-33
Remove the Bracket
3).
Install four bolts to the screw holes as shown in Figure 2-34.
Figure 2-34
Install the bolts
2.
Route the cables. The cables of speed dome can be routed either from the top or the side of the back box, as
shown in Figure 2-35. For the cables routed from the top of the back box, it is required to drill a cable hole in
the ceiling.
Figure 2-35
Cabling for Ceiling Mounting
3.
Install the speed dome.
1).
Rotate the bubble counterclockwise to separate it from the back box.
2).
Remove the protective lens cover, foam, and sticker from the dome drive.
3).
Attach the bubble to the back box, and rotate clockwise to secure it.
4).
Use the mounting base as a template to mark four screw holes onto the ceiling.
5).
If you route cables from the top of the back box, mark the cable hole on the ceiling and drill a hole.
6).
Secure the mounting base to the ceiling with the set screws.