Chapter 2. Primary CLI Syntax Reference
78
3ware 9000 Series Serial ATA Controller CLI Guide
help
This help command provide a table of contents, providing help with the
overall navigation of the CLI commands. Typical output looks like the
following.
(Details about help commands for the new command syntax are included on
the next couple of pages. For details about help commands for the legacy
syntax, see “help” on page 113.)
//localhost> help
Copyright(c) 2004, 2005 Applied Micro Circuits Corporation (AMCC). All
rights reserved.
AMCC/3ware CLI (version 2.x)
Commands Description
-------------------------------------------------------------------
info Displays information about controller(s), unit(s) and port(s).
maint Performs maintenance operations on controller(s), unit(s) and
ports.
alarms Displays current AENs.
set Displays or modifies controller and unit settings.
sched Schedules background tasks on controller(s) (9000
only)
quit Exits the CLI.
---- New Command Syntax ----
focus Changes from one object to another. For Interactive Mode Only!
show Displays information about controller(s), unit(s) and port(s).
flush Flush write cache data to units in the system.
rescan Rescan all empty ports for new unit(s) and disk(s).
commit Commit dirty DCB to storage on controller(s). (Windows
only)
/cx Controller specific commands.
/cx/ux Unit specific commands.
/cx/px Port specific commands.
/cx/bbu BBU specific commands. (9000
only)
Type help <command> to get more details about a particular command.
For more detail information see tw_cli's documentation.
help
show
This command provides specific show-related help, illustrating various ways
to use the show command. It provides reports on Controllers, Units and
Drives. See the section “Shell Object Commands” on page 23 for more
information.
