3scort TD-BLE, Руководство пользователя

Страница: 15 / 74

- Fill the tubes with fuel by either covering the drainage hole with insulation tape and turning the
device upside down (
Fig. 17 ) or by putting the sensor into a recipient so that the fuel reaches the
edge of its head ( Fig. 18 ). The first way is better.
Fig. 17 Covering drainage hole, turning the
sensor upside down and filling the tubes from a
jerry can
Fig. 18 Filling the tubes by putting the sensor
into fuel
- Switch off the Calibration without fuel tumbler ( Fig. 19 ) and press the Full button ( Fig. 20 , 1 ) when
the level is Stable or the digit before the last two of the CNT value stops changing ( Fig. 20 , 2 )
Fig. 19 Deactivate the Calibrate without fuel
option
Fig. 20 Press Full when the level is stable
15