manualshive.com logo in svg

3M UniPresser 3M710, Инструкция по эксплуатации

Поделиться
Скачать
3M UniPresser 3M710 Скачать руководство пользователя страница 5

 DOCUMENT

 OBSOLETE

5

78-8125-3042-2-B

Straight Splice

Basic Technique for Straight Splicing 3M

™

3M710 25-Pair Modules

1. Set group holders (fig. 1 #12) 38mm (1 1/2”)
above the position of the cable units to be spliced.

2. To disengage the “T” bar from the locked
position, turn the locking knob until the flat sec-
tion releases the “T” bar. (fig. 2 & 3 #4)

3. The “T” bar is now clear of the module assem-
bly area allowing module construction.

4. Insert an index strip between the vertical side
posts. (fig. 1 #2) The index strip cathedral win-
dows and latch locks should face the
operator/front.

5. Push the “L” clip knob inward to allow the
index strip to seat along the module assembly chan-
nel and locate under the spring loaded “L” clips
(fig. 1 # 8 & 9)

6. Secure the 25-pair group through the conductor
group holder. (fig. 1 #12) and dress individual pairs
into the cathedral windows of the index strip. Each
pair is divided by a colored peak projection. To
assist correct assembly, a color code guide (fig. 1
#10) is located on the operator side of the tool.

Note: The conductors must lay through the index strip straight and must not be pulled tight.

 DOCUMENT

 OBSOLETE

 DOCUMENT

 OBSOLETE

 DOCUMENT

 OBSOLETE

 DOCUMENT

 OBSOLETE

 DOCUMENT

 OBSOLETE

Содержание UniPresser 3M710

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды