Chapter 1 Overview
9
3M Touch Systems Proprietary Information
minor or moderate injury:
•
Dispose of the flat panel display according to applicable
governmental regulations.
Explanation of Symbols
Attention: Read accompanying documentation
Important Notes
•
Plug power cord into appropriate power source.
•
Plug power cord into a grounded receptacle.
•
When unplugging power supply cord, pull on plug not cord.
•
Do not connect or disconnect this product during an electrical
storm.
•
Install the display in a well-ventilated area. Always maintain
adequate ventilation to protect the display from overheating and
to ensure reliable and continued operation.
•
Remember to take into account that the operating temperature
of the installation may be greater than the room ambient, and
consideration should be given to installing the unit in an
environment compatible with the maximum rated ambient
temperature.
•
When installing the unit, ensure that it does not restrict the flow
of air to any other equipment within the installation required for
safe operation.
•
Do not expose this display to direct sunlight or heat. Passive
heat may cause damage to the metal case and other parts.
•
Do not install this display in areas where extreme vibrations
may be generated. For example, nearby manufacturing
equipment may produce strong vibrations. The vibrations may
cause the display to exhibit picture discoloration or poor video
quality.
•
Ensure the metal enclosure does not contact the touch screen.
•
Be sure to gasket display to enclosure properly.
•
To avoid ergonomic concerns:
Do not install the monitor in a manner or location with
awkward accessibility.
Extended use may result in muscle, tendon, or fixed posture