16
CT150 FPD Monitors
3M Touch Systems Proprietary Information
Unpacking Your Touch Monitor
Carefully unpack the carton and inspect the contents. Your CT150
includes the following cables and accessories:
•
SVGA video cable
•
RS-232 serial communication cable (or USB cable if applicable)
•
Optional AC/DC power supply (12V DC output)
•
AC power cable
•
CD with touch screen software, documentation, and utilities
•
Hardware kit (includes mounting brackets, screws, washers)
Mounting the CT150 Monitor
The CT150 monitor is designed to fit any type of enclosure. All
CT150 monitors are encased in rugged metal instead of plastic,
making them easy to integrate.
The monitor has a bezel already mounted to act as an interface with
a front mounting surface.
The CT150 monitor includes a hardware accessory kit for mounting
the unit into an enclosure. The CT150 hardware accessory kit
includes two brackets, washers, and screws. The mounting holes are
located on the sides of the monitor and are threaded to an M4 thread.
You can attach the brackets to the edges of the chassis. The brackets
are slotted, allowing the chassis to slide in and out. You can also
rotate the brackets to various positions.
The unit has a 75mm VESA mounting pattern on the back case to
allow for arm mount capability.
Note:
Do not mount the chassis unit directly from the rear of the cover.
Always use the holes and brackets provided. Do
not
drill additional holes in
the unit to mount brackets in other locations.
Access to the Video Controls
The controls for adjusting the video display are located on the back
of the CT150 monitor. These buttons let you display the on-screen
menu and adjust the phase, image position, contrast, and brightness.
Make sure you will be able to access the video controls once the
CT150 monitor is installed.