3M Touch Systems Proprietary Information
CHAPTER 4
Adjusting the Video Display
Your CT150 monitor has several control buttons and an on-screen
menu for adjusting the video display. For example:
•
You can adjust the pixel clock and phase to eliminate noise.
•
You can adjust the image contrast and brightness to your lighting
conditions.
•
You can adjust the horizontal and vertical position of the image.
This chapter presents guidelines for adjusting the video display and
describes how to use the available monitor controls to adjust the
image to your liking. Before you make any adjustments:
•
Be sure to set the controls under your normal lighting conditions.
•
Display a test image or pattern whenever you adjust the video.
Controls for Adjusting the Video Display
Your CT150 monitor has five controls for adjusting the video
display.
MENU SELECT LEFT RIGHT
LED
POWER
•
MENU – The first press of the menu button will call up the On Screen
Display (OSD). A second press will enter the current sub-menu of the
OSD. Further presses will allow you to cycle through the available
sub-menu options.
•
SELECT -- Return to the previous OSD menu level. If you are at the
top level, this will close the OSD display.
•
LEFT -- Decreases the value of the selected menu option.
•
RIGHT -- Increases the value of the selected menu option.
•
LED – Indicates whether the monitor is on.
•
POWER – Turns the monitor on or off.