32
CT150 FPD Monitors
3M Touch Systems Proprietary Information
Power Management
The CT150 monitor conforms to the Video Electronics Standards
Association (VESA) Display Power Management Signaling
(DPMS) standard. To benefit from power management, the monitor
must be used in conjunction with a computer and video card that
implements the VESA DPMS standard.
The PC automatically invokes the power management feature if you
do not use the touch screen, mouse, or keyboard for a user-defined
period. To restore the video image, simply touch the screen, press a
key, or move the mouse. To set the period of time after which the
PC will invoke the power management feature, refer to the user
manual that came with your video card or PC.
Regulatory Agency Approvals
The CT150 monitor complies with the following regulatory
standards:
•
FCC-B
•
CE
•
UL/cUL
•
C-Tick
This equipment has been tested and found to comply within limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection, against
harmful interference in residential installations. This equipment
generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may case
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television
equipment reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Move the equipment away from the receiver.
Consult the dealer or an experienced radio/television technician for
additional suggestions.