3M HEADSET C1060, Руководство по эксплуатации

Страница: 15 / 34

Model C1060 Operation

3M 2001 February
9
System startup includes turning on the base station and each headset that will be
used.
To turn on the base station:
1. Slide the power ON/OFF switch to the ON position. Check to see that the
POWER indicator lights.
2. Slide the VOLUME switch to the desired position (DAY or NIGHT).
To turn on the headset, press the ON switch located on the inside of the
transceiver housing. A single tone will sound in the earphone and the LED
indicator will glow green to indicate the headset has been turned on.
The system has several operating modes. The number of available operating
modes depends on the system configuration (single–lane vs dual–lane, standard
communication vs duplex communication, etc.).
In the standby mode, the headset is on and waiting to receive communication
from the menu sign or other headset operators. This mode is available with all
system configurations.
Use the talk/listen mode to talk to the customer at the menu sign. This mode is
available with all system configurations.
Single–Lane Standard or Duplex Communication Systems
1. A single beep alert tone sounds in the headset at 2–second intervals when
the system detects a customer (vehicle) at the menu sign.
2. When you hear the alert tone, press and hold T1 or T2 to talk to the
customer at the menu sign. Release T1 or T2 to listen.
Dual–Lane Standard or Duplex Communication Systems
In dual–lane systems, some headsets are programmed to communicate with
Lane 1 and others are programmed to communicate with Lane 2. The headsets
are labeled accordingly.
1. An alert tone sounds in the headset when the system detects a customer
(vehicle) at the menu sign:
•
The alert tone for Lane 1 is a single beep that repeats at 2–second
intervals.
•
The alert tone for Lane 2 is a double beep that repeats at 2–second
intervals.
2. When you hear the single beep alert tone, press and hold T1 and talk to the
customer at menu sign 1. Release T1 to listen.
When you hear the double beep alert tone, press and hold T2 to talk to the
customer at the menu sign 2. Release T2 to listen.
Cross–Lane Communication Systems
Communication During Peak Hours
During peak hours, the cross–lane module is turned off and the system functions
like a dual–lane duplex system. Some headsets are programmed to
communicate with Lane 1 and others are programmed to communicate with
Lane 2. The headsets are labeled accordingly.
System Startup
Turning On the Base
Station
Turning On the
Headset
Operating Modes
Standby Mode
Talk/Listen Mode