![background image](http://html1.mh-extra.com/html/3m/ecam-27mm-act/ecam-27mm-act_instructions-manual_442559010.webp)
10
78-8140-2401-0-B
Mastic Collar Build
8.3
Mark cables approximately .25 inches (6 mm)
from the end of sheath. This is to locate the
mastic collar.
8.4
Washers can be split along notch for installation
over the cable.
8.5
Install two washers on each cable near sheath
end as shown.
8.6
Unroll mastic and measure out the required
amount. Repeat for second cable.
Note: See chart in section 6.2 for required mastic
length.
Note: Warm mastic before use if temperature is below
50°F (10°C).