3M Dynatel 2250M Скачать руководство пользователя страница 45

Страница: 45 / 65

78-8130-6150-0-F

15. Populate as many fields as possible from

the drop-down list of common (compressed)

terms available to conserve marker memory

space, or choose

UserEdit

if a term is not

found to meet the user's requirements.

Select term by pressing the up/down arrows

[SK] and press

Locate/OK

[5].

16. Navigate to the next field by pressing the

left/right arrow [SK].

17. Press

Modify

[SK] to populate the

highlighted field.

18. Populate additional fields, as needed,

using the above procedure steps 16 and 17.

Templates are limited to six Label and six

Description fields (256 bits of data total).

19. When the template is complete, save the

template by pressing

Locate/OK

[5].

B. Editing Templates

The operator can select an existing template and

make changes to it in the same manner described in

Creating Templates

. The following save screen will

be displayed.

Over Write:

Saves all modifications that have been made to the original template.

Rename:

Overwrites the old template with the new name and all modifications. Display

will return to the template name field. Modify the name of the template and press

Locate/OK

[5] to save.

Save New:

Creates a new template containing all information. Original template remains

unchanged. Display will return to the template name field. Modify the name of the

template and press

Locate/OK

[5] to save.

Содержание Dynatel 2250M


































































Результаты поиска

Содержание Dynatel 2250M

Отзывы:

Похожие инструкции для Dynatel 2250M

Бренды по названию

Популярные бренды

3M Dynatel 2250M, Руководство оператора

Результаты поиска

Содержание Dynatel 2250M

Отзывы:

Похожие инструкции для Dynatel 2250M

Бренды по названию

Популярные бренды