3M DBI SALA 2100090, Инструкция пользователя

Страница: 13 / 16

13
5.3 PRODUCT LIFE: The functional life of the Fall Arrest System is determined by work conditions and maintenance. As long
as the product passes inspection criteria, it may remain in service.
6.0 MAINTENANCE, SERVICING, STORAGE
6.1 CLEANING: Periodically clean the Perimeter Limiters’s metal components with a soft brush, warm water, and a mild soap
solution. Ensure parts are thoroughly rinsed with clean water.
6.2 SERVICE: Only 3M or parties authorized in writing by 3M may make repairs to this equipment. If the Perimeter Limiter
has been subject to fall force or inspection reveals an unsafe or defective conditions, remove the system from service and
contact 3M regarding replacement or repair.
6.3 STORAGE AND TRANSPORT: When not in use, store and transport the Fixed Beam Anchor and associated fall protection
equipment in a cool, dry, clean environment out of direct sunlight. Avoid areas where chemical vapors may exist.
Thoroughly inspect components after extended storage.
7.0 LABELS
Figure 11 illustrates labels on the Perimeter Limeter. Labels must be replaced if they are not fully legible. Information provided
on each label is as follows:
A
Alteration or misuse of this product or failure to follow instructions may result in serious injury or death.
B
Safe Work Zone Warnings
C
Shipping Purposes Only
D
Electrocution Hazards
E
Flexiguard Logo Label
F
MFRD (Y/M), LOT Number, Model Number, Length.