8
Operation
(Continued)
Figure 3-5
WARNING – Use care when working
near cut-off knife as knife is
extremely sharp. If care is not taken,
severe personal injury could result.
Manually turn tape roll to create slack tape while
pulling threading needle through tape applying
mechanism until needle is through and tape is in
alignment with applying roller.
Excess tape can be cut with a scissors at applying
roller.
Buffing Roller Pressure Adjustment
Buffing roller pressure is critical especially on lightly
filled boxes. To adjust pressure, see "Adjustments –
Applying Mechanism/Buffing Extension Springs",
page 11.
Figure 3-5 – Tape Loading
Содержание AccuGlide II 29600
