3M 5458A-IJ, Инструкция по эксплуатации

Страница: 4 / 16

4 78-8127-8872-3-
B
2.4 Mark the cable semi-con 4" (102 mm) from the cable jacket edge. Apply two half-lapped layers of Scotch®
Electrical Shielding Tape 24 over the cable semi-con, starting from the mastic edge out to the mark on the
semi-con and back. Half-hitch to tie off (Figure 3).
Insulation Semi-Con
Neutral Wires
Scotch® Mastic Sealing Strip 2230
4"
(102 mm)
Scotch® Electrical Shielding Tape 24
Figure 3
2.5 Carefully lay neutral wires back down on top of the shielding tape and press into mastic. Keep wire profile low
by following the concentric turn in the cable (Figure 4).
2.6 Remove the liner from one 3M
™
Aluminum Foil Tape Strip 1115B and secure the ends of the neutral wires.
Wrap the aluminum tape on top of itself and tightly press down on the edge of the tape toward the end of the
electrical shielding tape (Figure 4).
Insulation Semi-Con
Neutral Wires
3M ™ Aluminum Foil Tape Strip 1115B
Scotch® Electrical Shielding Tape 24
Press down edge tightly
Figure 4