3M 5458A-IJ, Инструкция по эксплуатации

Страница: 10 / 16

10 78-8127-8872-3-
B
5.3 Wrap two half-lapped layers of vinyl tape over the constant force springs (Figure 17).
Vinyl Tape
Figure 17
6.0 External Grounding (Optional)
Note: Use these instructions if circuit grounding is required at this location.
6.1 Connect a ground wire to the pre-installed ground braid on the integrated splice using an appropriate connector.
Keep connector profile as low as possible. For C-tap or H-tap connectors, position flat against the cable. Crimp
connector following the connector manufacturer’s recommendations (Figure 18).
Ground Wire
Connector
Ground Braid
Figure 18