3M 3M-Matic Dual S-867 II, Инструкция и перечень запасных частей

Страница: 26 / 62

6
Specifications
4. Cycle Time:
1.2 seconds per cycle
The cycle time is sufficient to satisfy the majority
of applications. Flow controls
(see Machine Setup
and Adjustments section) control the application
rate and return stroke rate of the buffing and tape
feed air cylinders. While these flow controls can
be adjusted for increased
speed, this practice
may result in higher maintenance costs and
shorten machine
life.
1. Tape Specifications:
Tape – Most "Scotch" brand filament tapes.
Tape Width – 3/8 inch [9 mm] to 1-1/2 inch [36
mm].
Tape Roll Diameter – Up to 15 inches [380 mm]
maximum on a 3 inch [76.2 mm] diameter core.
Applied Tape Length – 4 1/2 inches [115 mm]
(nominal). Tape legs are 2 1/4 ±1/8 inches
[55 mm ± 3.2 mm].
2. Air Power Requirements:
60 to 65 PSIG [415 to 450 kPa] gauge pressure.
2.16 SCFM [3.65 m 3 /h 21°C, 101 kPa] at 50
cycles/min
5. Operating Conditions:
Use in dry, relatively clean environments at 40°
to 120°F [5° to 49°C] with clean,
dry boxes.
Important – Machine should not be washed
down or subjected to conditions causing
moisture condensation on components.
6. Machine Dimensions:
Length – 31 inches [790 mm] (includes 360
yard [330 m] tape roll)
Height – 29 inches [735 mm] (includes 360
yard [330 m] tape roll)
Width – 11 inches [280 mm]
Weight – Packaged 83 lb [37.7 kg]
Unpackaged 75 lb [34 kg]
3. Box Size Capacity:
Bottom or Top Taping Position
Height – 2 1/4 inches [60 mm] minimum to
unlimited maximum
Width – 3 inches [75 mm] minimum to
unlimited maximum
Depth – 2 1/4 inches [60 mm] minimum to
unlimited maximum
Note: Operator capability will determine
maximum height, width, and depth.
Smaller
heights and widths are sometimes possible
and it is recommended
that your 3M
Representative be contacted for testing of
these applications.