3M 3M-Matic Dual S-867 II Скачать руководство пользователя | Manualshive

Страница: 22 / 62

background image

2

Equipment Warranty and Limited Remedy: THE FOLLOWING WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTY OF MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE AND ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, A CUSTOM OR
USAGE OF TRADE:

3M warrants that its

3M-Matic™ S-867 "L" Clip Applicator, Type 10500

will be free from defects for ninety (90)

days after delivery. If any part is proved to be defective within the warranty period, then the exclusive remedy and
3M’s and seller’s sole obligation shall be, at 3M’s option, to repair or replace the part, provided the defective part is
returned immediately to 3M’s factory or an authorized service station designated by 3M. A part will be presumed to
have become defective after the warranty period unless the part is received or 3M is notified of the problem no later
than five (5) calendar days after the warranty period. If 3M is unable to repair or replace the part within a reasonable
time, then 3M, at its option, will replace the equipment or refund the purchase price. 3M shall have no obligation to
provide or pay for the labor required to install the repaired or replacement part. 3M shall have no obligation to repair
or replace (1) those parts failing due to operator misuse, carelessness, or due to any accidental cause other than
equipment failure, or (2) parts failing due to non-lubrication, inadequate cleaning, improper operating environment,
improper utilities or operator error.

Limitation of Liability:

3M and seller shall not be liable for direct, indirect, special, incidental or consequential

damages based upon breach of warranty, breach of contract, negligence, strict liability or any other legal theory.

The foregoing Equipment Warranty and Limited Remedy and Limitation of Liability may be changed only by a
written agreement signed by authorized officers of 3M and seller.

“Scotch”

and

“3M-Matic”

are trademarks of 3M, St.Paul, Minnesota 55144-1000

S-867 Contents

(1) S-867 "L" Clip Applicator, Type 10500

(1) Instruction and Parts List Manual

«
...
20
21
22
23
24
...
»

Содержание 3M-Matic Dual S-867 II































































Отзывы:

Нет отзывов

Похожие инструкции для 3M-Matic Dual S-867 II

Бренд: Akai Страницы: 60

Бренд: ROSCAMAT Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды