3M 3M MATIC A80F Скачать руководство пользователя | Manualshive

Страница: 96 / 136

background image

8

AccuGlide

™

, Scotch

™

, and 3M-Matic

™

are Trademarks of 3M, St. Paul, Minnesota 55144-1000

Equipment Warranty and Limited Remedy: THE FOLLOWING WARRANTY IS MADE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY ARISING
OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE:

Limitation of Liability:

Except where prohibited by law, 3M and seller will not be liable for any loss or damage

arising from this 3M equipment, whether direct, indirect, special, incidental, or consequential, regardless of the legal
theory asserted, including breach of warranty, breach of contract, negligence, or strict liability.

Note:

The foregoing Equipment Warranty and Limited Remedy and Limitation of Liability may be changed only by

a written agreement signed by authorized representatives of 3M and seller.

3M sells its

AccuGlide™ 2+ STD 2 Inch Upper and Lower Taping Heads, Type 10500

with the following warranty:

1. The Taping Head blade, springs and rollers will be free from defects in material and manufacture for

ninety (90) days after delivery.

2. All other Taping Head parts will be free from defects in material and manufacture for three (3) years after

delivery.

If any part is defective within this warranty period, your exclusive remedy and 3M’s and seller’s sole obligation
shall be, at 3M’s option, to repair or replace the part. 3M must receive actual notice of any alleged defect within
a reasonable time after it is discovered, but in no event shall 3M have any obligation under this warranty unless it
receives such notice within

fi

ve (5) business days after the expiration of the warranty period. All notices required

hereunder shall be given to 3M solely through the 3M-Matic™ Help line (800-328-1390). To be entitled to repair
or replacement as provided under this warranty, the part must be returned as directed by 3M to its factory or other
authorized service station designated by 3M. If 3M is unable to repair or replace the part within a reasonable time
after receipt thereof, 3M, at its option, will replace the equipment or refund the purchase price. 3M shall have no
obligation to provide or pay for the labor required to remove any part or equipment or to install the repaired or
replacement part or equipment. 3M shall have no obligation to repair or replace those parts failing due to normal
wear, inadequate or improper maintenance, inadequate cleaning, non-lubrication, improper operating environ-
ment, improper utilities, operator error or misuse, alteration or modi

fi

cation, mishandling, lack of reasonable care,

or due to any accidental cause.

iv

STD 2" Taping Head

2009 August

«
...
94
95
96
97
98
...
»

Содержание 3M MATIC A80F









































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3M MATIC A80F

Бренд: Taiji Страницы: 8

Бренд: Sealer Sales Страницы: 8

Бренд: Panasonic Страницы: 28

Бренд: Panasonic Страницы: 28

Бренд: Panasonic Страницы: 27

Бренд: Panasonic Страницы: 32

Бренд: DYASET Страницы: 8

Бренд: 3M Страницы: 120

3M-Matic AccuGlide 3 200a

Бренд: 3M Страницы: 124

Бренд: Cadco Страницы: 2

Бренд: Omcan Страницы: 12

Бренд: Omcan Страницы: 12

Бренд: Omcan Страницы: 12

Бренд: Cres Cor Страницы: 2

Бренд: Star Manufacturing International Страницы: 8

mr steam Fifth Avenue H542

Бренд: Feel Good Страницы: 12

Бренд: Kogan Страницы: 8

Бренд: Equipex Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды