3M 3M MATIC A80F Скачать руководство пользователя | Manualshive

Страница: 16 / 136

background image

4

2-GENERAL INFORMATION

(continued)

2.3 Warranty

Equipment Warranty and Limited Remedy: THE FOLLOWING WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTY OF MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE AND ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, A CUSTOM OR
USAGE OF TRADE:

3M sells its

3M-Matic

™

a80f Adjustable Case Sealer, Type 11000

with the following warranties:

1. The drive belts and the taping head knives, springs and rollers will be free from all defects for ninety (90

days after delivery.

2. All other taping head parts will be free from all defects for three (3) years after delivery.
3. All other parts will be free from all defects for two (2) years after delivery.

If any part is proved to be defective within its warranty period, then the exclusive remedy and 3M’s and seller’s
sole obligation shall be, at 3M’s option, to repair or replace the part, provided the defective part is returned
immediately to 3M’s factory or an authorized service station designated by 3M. A part will be presumed to have
become defective after its warranty period unless the part is received or 3M is notifi ed of the problem no later than
fi ve (5) calendar days after the warranty period. If 3M is unable to repair or replace the part within a reasonable
time, then 3M at its option, will replace the equipment or refund the purchase price. 3M shall have no obligation
to provide or pay for the labor required to install the repaired or replacement part. 3M shall have no obligation
to repair or replace (1) those parts failing due to operator misuse, carelessness, or due to any accidental cause
other than equipment failure, or (2) parts failing due to non-lubrication, inadequate cleaning, improper operating
environment, improper utilities or operator error.

Limitation of Liability:

3M and seller shall not be liable for direct, indirect, special, incidental or consequential

damages based upon breach of warranty, breach of contract, negligence, strict liability or any other legal theory.

The foregoing Equipment Warranty and Limited Remedy and Limitation of Liability may be changed only by a
written agreement signed by authorized offi cers of 3M and seller.

2010 March

a80f-NA

Contents – a80f Adjustable Case Sealer

(1)

a80f Adjustable Case Sealer, Type 11000

(1)

Tool/Spare Parts Kit

(1)

Instruction and Parts Manual

«
...
14
15
16
17
18
...
»

Содержание 3M MATIC A80F









































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3M MATIC A80F

Бренд: 4titude Страницы: 25

Бренд: Duke Страницы: 12

Бренд: Omcan Страницы: 48

Бренд: RoboLabs Страницы: 9

RADIANT Straight

Бренд: Amba Страницы: 2

Бренд: Royal Catering Страницы: 19

Бренд: Insta Страницы: 12

Bair Hugger 675

Бренд: 3M Страницы: 2

Бренд: Kriss Страницы: 4

Бренд: Paitec Страницы: 14

Бренд: inventum Страницы: 32

Бренд: Baron Страницы: 45

Бренд: Roundup Страницы: 24

Бренд: Hatco Страницы: 2

Бренд: Rommelsbacher Страницы: 36

Бренд: Rommelsbacher Страницы: 36

Бренд: Princess Страницы: 52

Bottle Warmer and Sterilizer

Бренд: Lil' Jumbl Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды