manualshive.com logo in svg

3M 3M MATIC A80F, Инструкция и перечень запасных частей

Поделиться
Скачать
3M 3M MATIC A80F Скачать руководство пользователя страница 42

30 

11 - SET UP AND ADJUSTMENTS

 (continued)

• 

To reduce the risk associated with 

  

pinches  hazards:

−

 

Keep hands clear of the upper head support 
assembly as boxes are transported through 
the machine.

−

 

Keep hands, hair, loose clothing, and jewelry 
away from box compression rollers.

−

 

Always feed boxes into the machine by 
pushing only from the end of the box.

−

 

Keep hands, hair, loose clothing, and jewelry 
away from moving belts and taping heads.

CAUTION

2010 March

a80f-NA

Turn electrical switch to 

On

 to start drive belts.  

Move box forward under upper taping head until it 
is taken away by the drive belts. Always push at the 
end of the box. If box is hard to move under head or 
is crushed, raise the head slightly. If box movement 
is jerky or stops under upper head, lower the upper 
head slightly to add more pressure between box and 
drive belts.

Important: 

Before starting the machine, verify that 

    no tools or other objects are on the conveyor bed.

Drive Belt Tension

Belt tension must be adequate to positively move 
boxes through the machine and belts should run 
fully on the surface of the pulleys at each end of 
the frame.  The idler pulleys on the infeed end are 
positioned by tension adjustment screws.   
To adjust tension, see 

Section 13 

Maintenance 

and Repairs  "Maintenance – Drive Belt 
Replacement/Tension Adjustment". 

Important –

 If drive belts are allowed to slip on

  

 

box, excessive belt wear will occur.

Содержание 3M MATIC A80F









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды