background image

mr

.

steam

®

 

Electric Towel Warmers

   

Installation and Operating Instructions

________________________________________________________________

 

Table of Contents

_____________________

Electric Models

General Information & Specifications ...2
Wall Preparation ....................................3
Mounting ...............................................4
Installation

  Models 542, 634 .................................5
  Model 500 ..........................................6
Electrical Connections ....................... 7-8
Digital Programmable Timer .................8

___________________________________

Hydronic Model

General Information ..............................9
Pre-Installation & Wall Prep ................10
Plumbing Preparation ..........................11
Hook-up and Installation ............... 11-12
Operation & Maintenance ...................12

Models W500, W542 H542, W634

W500

                               W542                              H542                             W634

Installation, Operation and Maintenance Manual      

Fifth Avenue Collection

 Electric & Hydronic Towel Warmers

Models: W500, W542, H542, W634

mr

.

steam

® 

                 

Feel Good Inc.

pur

 

103852 

rev

 

1.15

IMPORTANT NOTE:

  As you follow these instructions, you will notice warning and caution symbols.  

This blocked information is important for the safe and efficient installation and operation of this Towel Warmer. 

These are types of potential hazards that may occur during this installation and operation:

!

WARNING

!

CAUTION

 

signals a situation 

where minor injury or product damage 
may occur if you do not follow instructions.

 

states a hazard 

may  cause serious injury or death if 
precautions are not followed.

IMPORTANT NOTE:

 This highlights 

information that is especially relevant  

to a problem-free installation.

_______________________________________________
Model  

_______________________________________________
Serial No.

Содержание mr steam Fifth Avenue H542













Отзывы: