3DLabPrint Hawker Sea-Fury FB 11, Инструкция по сборке и эксплуатации

Страница: 2 / 37

T
3D Printed project by ADDIMP 3D
This 3D printed project permit to reproduce the Hawker Sea-Fury FB 11.
It is your responsibility to manufacture all of the parts necessary for the construction of this model.
All files are provided in stl format, compatible with the majority of slicers softwares in the 3D printing
market.
1- Historic
The Sea Fury is a British aircraft designed and manufactured by Hawker Aircraft . Its design was initiated in 1943 with
an aircraft initially named Fury.
As the Second World War ended, the RAF cancelled their order for this aircraft.
The Royal Navy needed a carrier aircraft to replace a great range of old aircraft being operated by the Fleet Air Arm,
so the development of the Sea Fury proceeded, and the type began entering operational service in 1947.
It was the last propeller-driven fighter to serve with the Royal Navy, and one of the fastest production
single engine aircraft ever built.
It was used during the Korean War in the early 1950s, as well as against the 1961 Bay of Pigs Invasion of Cuba.
The Sea Fury was fitted with the Bristol Centaurus engine, and armed with four wing-mounted Hispano V cannons
(20 mm).
Developed as an aerial fighter aircraft, the Sea Fury was used as a fighter-bomber, as well as pure fighter.
The Sea Fury as an international life as both a carrier and land-based aircraft. It was operated by countries
including
Australia , Burma , Canada , Cuba , Egypt , West Germany , Iraq , and Pakistan . This plane fighting effectively
even against the MiG-15 .
The Sea Fury was retired by the majority of its military operators in the late 1950s and replaced by jet-propelled
aircraft.
Since, number of aircraft were used in the civil sector, and several remain airworthy in the 21st century as heritage
and racing aircraft.