3DCPI 3DCPI-02, Руководство для стартапов

Страница: 38 / 44

3DCPI-02
START-UP GUIDE
2. Select “Change Speed” as shown below, to change building speed. (NOTE: The
value displayed is a scale factor compared with default speed.) Select “Change
Temperature” as shown below, to change building temperatura.
VI.PyPy Acceleration
In the newest version of ReplicatorG, PyPy is introduced to GCode generation. When
converting a model with the same settings, PyPy is 2-3 times faster than traditional
Python. These two kinds of interpreters have their own advantages. Python has more
stable performance, while PyPy has superior processing speed. The following
paragraphs will show you how to set up PyPy acceleration. Use it or not according to
your needs.
PyPy vs Python Processing Speed
Model(Snake) Whistle 3D_Knot
Python 1min 29sec 1min 30sec 2min 37sec
PyPy 41sec 45sec 1min 10sec