3DCPI 3DCPI-02, Руководство для стартапов

Страница: 23 / 44

3DCPI-02
START-UP GUIDE
c. Rotate
Z+
、
Z-: Rotate your model by 90 degrees in Z axis.
Lay Flat: It keeps the model in balance, which is very helpful for inclined models.
Strongly recommend using this function before printing.
Rotate around Z: When it´s checked, the model rotates around Z-axis by holding the
mouse and moving.
d. Mirror
Inverted X: Right mirror image.
Inverted Y: Back mirror image.
Inverted Z: Bottom mirror image.
e. Scale
Input numbers to scale. When the number is less than 1, the model is scaled down.
When it´s greater than 1, the model is scaled up.
The options below are to convert model dimension between inch and millimeter.
Click the “Fill the Build Area” button to maximize the model, which is the maximum
print size.
III. Installing software
Setting up 3D data
3. To estimate time for printing, click GCode-> Time Estimate (as shown below).