3DCPI 3DCPI-02, Руководство для стартапов

Страница: 19 / 44

3DCPI-02
START-UP GUIDE
c. Select Machine->Connection (Serial Port) ->COM09. If you have only one printer,
select the latest port. If you have more than one printer, please select the port according
to your printer.
If there´s no serial port on the menu, please click Machine->Connection (Serial Port) -
>Rescan serial ports. If it doesn´t work, please close ReplicatorG, disconnect the USB
cable from your computer, and wait for 5 seconds. Then connect the USB cable to the
computer, run ReplicatorG, and click Machine->Connection (Serial Port) ->Rescan
serial ports. Wait for 10 seconds, and you¡¯ ll be able to select serial port.
d. Make sure you´ve selected the corresponding serial port. Click the Connect icon (as
shown below) at the right of the top bar. Once connected, GCode generator and
connection serial port can¡¯ t be changed. If you want to change, please click Disconnect
icon (at the right side of the following icon).