3Com VCX V7000, Руководство по установке

Страница: 371 / 488

Configuration Files 369
Sample V6100 Media Gateway Configuration File
TDMBusClockSource = 4
Specify the TDM Bus Clock Source. The gateway can either generate its
own timing signals, using an internal clock, or recover the signals from
one of the E1/T1 trunks.
■
1 — Generate clock from local source (default).
■
4 — Recover clock from PSTN line.
EnableLANWatchdog = 1
Set this value to 1 to enable the Media Gateway to restart when a LAN
failure is detected.
MIIRedundancyEnable = 1
RoutingTableHopsCountColumn = 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0
[ATM Params]
[Analog Params]
LifeLineType = 2
Set this parameter to 2 to activate the lifeline under any of these
conditions:
■
The media gateway loses power
■
The network link is physically disconnected
■
The network link fails for any reason
FXSLoopCharacteristicsFilename = 'COEFFICIENT_M1K_FXS.dat'
FXOLoopCharacteristicsFilename = 'COEFFICIENT_M1K_FXO.dat'
These parameters hold the names of the characteristics files for the FXS
and FXO analog gateways. Do not modify these values.
FarEndDisconnectSilenceMethod = 0
Specify the method by which the Media Gateway detects silence during a
call. Silence is detected based on these values:
■
0 — Disabled. This is the default setting.
■
1 — Based on a specified number of silence packets that have been
transmitted or received.