3Com VCX V7000, Руководство по установке

Страница: 100 / 488

100 C
HAPTER
2: I
NSTALLING AN
IP T
ELEPHONY AND
M
ESSAGING
S
ERVER
Configuring a Branch Office IP Telephony and Messaging Server
CAUTION: If you add a new branch office server to an existing VCX
system, you must ensure that the new server is running the same VCX
software version as the other servers in the system before you add it to
the VCX system.
Before you install a branch office IP Telephony and Messaging server, you
must modify the regional office firewall software to permit traffice from
the branch office server. Log in to the Authentication and Directory (Data)
server in the regional office and enter this command for each branch
office server that you install:
modfw -p oracle allow <IP address of branch office server>
Before you install a branch office IP Telephony and Messaging server, you
must also set up a database schema on the regional office Authentication
and Directory server. This schema acts as a replica of the branch office
server’s database schema and must be set up prior to the installation of
the branch office server.
CAUTION: If you previously tried to set up a branch office IP Telephony
and Messaging server without first setting up the replica database on the
regional office Authentication and Directory server, you may have to drop
database replication by logging in on the regional Authentication and
Directory server as cworks and entering these commands:
cd /opt/3com/VCX/vcxdata/bin
./dropReplication
To set up a branch office schema on the regional Authentication and
Directory server:
1 Log in on the regional Authentication and Directory (Data) server as
cworks and enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./installVcxdata
2 Select option 1 - Create a Backup Database Schema for a Branch Office.
3 When the script prompts you, enter the Site ID for the branch office.
Site IDs can contain only the characters A-Z, a-z, and 0-9.
4 When the script prompts you, enter the Site Name for the branch office.