3Com VCX V7000, Руководство по установке

Страница: 193 / 488

193
Sample Services Configuration Script — Secondary IP Messaging Server (continued)
Common Agent supports a management station authentication feature.
Answering 'Y' here will allow only a set of pre-identified SNMP management
stations to manage the system. (You will be able to enter IP addresses of
authorized management stations next. Authorized management stations can
also be configured using EMS or another management station at a later
point.)
Enable management station authentication? [N] :
Press the Enter or Return key to accept the default answer (N). To enable
management station authentication, enter
Y . The script will then accept
the IP addresses of up to four network management stations.
Do you wish to change any of the Common Agent parameters? [N] :
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script presents each of the items that you
have entered during the most recent part of the script and allows you to
accept the value or change it.
----------------------------------------------------------------------------
Initial VCX configuration is now complete. Before the information just
entered is saved, you have the option of reviewing and changing parameters
for each VCX service at a detailed level. This is not needed in most cases
and is recommended only for advanced users.
Do you wish to review service parameters in detail? [N] :
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script enters a mode in which you can
review and modify low-level configuration parameters for each service.
This is
not needed for standard configurations and using it successfully
requires substantial VCX configuration expertise. 3Com does not support
this mode of making configuration changes.
----------------------------------------------------------------------------
Please wait while the wizard completes.
The script now saves all of the configuration parameters, displays several
status messages, and exits.
End of Sample Services Configuration Script — Secondary IP Messaging Server