![background image](http://html1.mh-extra.com/html/3com/vcx-v6000/vcx-v6000_manual_3044461014.webp)
14
C
HAPTER
3: C
ABLING
THE
V6000/V6100 M
EDIA
G
ATEWAYS
3
Connect the first Ethernet connection (labeled I), located on the CPU
module of the V6000/V6100 front panel, directly to the network using a
standard RJ-45 Ethernet cable (and the second connection as optional
redundancy / backup). For the connector pinouts, see
, next.
Figure 3
RJ-45 Ethernet Connector Pinouts
For redundancy, 3Com recommends that you connect each of the
Ethernet connectors to a different switch.
When assigning an IP address to the V6000/V6100 using HTTP (see
“Assigning an IP Address Using HTTP”
), you may need to disconnect this
cable and re-cable it differently.
4
Using the supplied RS-232 cable, connect the V6000/V6100 RS-232 port
(labeled I0I0) to either the COM1 or COM2 RS-232 communication port
on your PC. Using the RS-232 port is optional.
5
If you want to set up a dry contact system, refer to the User's Manual.
6
Connect the left (active) 100-240V~50-60 Hz power socket to the mains
using the supplied cord.
1 2 3 4 5 6 7 8
4, 5, 7, 8
not
connected
1 - Tx+
2 - Tx-
3 - Rx+
6 - Rx-
Содержание VCX V6000
Страница 4: ...4...
Страница 8: ...8 ABOUT THIS GUIDE...
Страница 10: ...10 CHAPTER 1 QUICK START...