background image

3Com Corporation

 

350 Campus Drive 
Marlborough, MA

 

01752-3064

Copyright © 2008, 3Com Corporation. All rights reserved. No part of this 
documentation may be reproduced in any form or by any means or used to make any 
derivative work (such as translation, transformation, or adaptation) without written 
permission from 3Com Corporation.

3Com Corporation reserves the right to revise this documentation and to make 
changes in content from time to time without obligation on the part of 3Com 
Corporation to provide notification of such revision or change.

3Com Corporation provides this documentation without warranty of any kind, either 
implied or expressed, including, but not limited to, the implied warranties of 
merchantability and fitness for a particular purpose. 3Com may make improvements 
or changes in the product(s) and/or the program(s) described in this documentation 
at any time.

UNITED STATES GOVERNMENT LEGENDS:

If you are a United States government agency, then this documentation and the 
software described herein are provided to you subject to the following: 

United States Government Legend:

 All technical data and computer software is 

commercial in nature and developed solely at private expense. Software is delivered 
as Commercial Computer Software as defined in DFARS 252.227-7014 (June 1995) 
or as a commercial item as defined in FAR 2.101(a) and as such is provided with only 
such rights as are provided in 3Com’s standard commercial license for the Software. 
Technical data is provided with limited rights only as provided in DFAR 252.227-7015 
(Nov 1995) or FAR 52.227-14 (June 1987), whichever is applicable. You agree not to 
remove or deface any portion of any legend provided on any licensed program or 
documentation contained in, or delivered to you in conjunction with guide.

Unless otherwise indicated, 3Com registered trademarks are registered in the United 
States and may or may not be registered in other countries.

3Com and the 3Com logo are registered trademarks of 3Com Corporation. VCX is a 
trademark of 3Com Corporation.

Other brand and product names may be registered trademarks or trademarks of their 
respective holders.

Содержание VCX V6000

























Отзывы: