Running the Diagnostic Tests
4-3
5 In the main menu, select
Adapter Diagnostics
and
then select
Continue
.
To make selections in 3TLVDIAG:
■
Use the [Tab] key to select buttons, and press [Enter].
■
Use the arrow keys to select other items, and
press [Enter].
The Adapters Found in System screen appears, listing all
installed 3C339 PCI NICs.
6 Select the NIC you want to test.
The Diagnostic Setup screen for the selected NIC appears,
as shown in Figure 4-2.
Figure 4-2
Diagnostic Setup Screen
7 Select the ring speed and select
Continue
.
The ring speed can be 4 or 16 Mbps (16 is the default).
This selection must match the network speed, or an
error will remove the NIC from the network.
This selection remains in effect during the diagnostics
session. When you exit the diagnostics, the ring speed
reverts to that specified during installation.
3Com 3TLVDIAG – Diagnostics
Diagnostic Setup
3C3X9
Node Address: 00E0FCFFFCFE
Diagnostic Options
Override Ring Speed:
16
Mbps
Adapter Configuration
F1 = Help F2 = Keyboard Conventions
Press Continue or <ENTER> to see the list of tests to run.
Base I/O:
IRQ:
FCE0
15
LAN Speed:
4
Mbps
Exit
Previous Screen
Continue
Main Menu
Book Page 3 Thursday, June 5, 1997 9:07 AM
Содержание TokenLink 3C339
