3Com Switch 7757, Руководство по настройке

Страница: 201 / 940

Port Security Overview 201
n
■
When a port works in the mac-else-userlogin-secure mode or the
mac-else-userlogin-secure-ext mode, for the same packet, intrusion
protection can be triggered only after both MAC authentication and 802.1x
authentication fail.
■
When a port works in the userlogin-secure-oui mode, intrusion protection
will not be triggered even if the port receives a frame with an OUI value that is
not the specified one.
userlogin-se
cure The port is enabled only after an access user passes the
MAC-based 802.1x authentication. When the port is
enabled, only the packets of the successfully authenticated
user can pass through the port.
In this mode, only one 802.1x-authenticated user is allowed
to access the port.
When the port changes from the normal mode to this
security mode, the system automatically removes the
existing dynamic MAC address entries and authenticated
MAC address entries on the port.
In any of these
modes, the
device will
trigger NTK and
intrusion
protection upon
detecting an
illegal packet.
userlogin-se
cure-ext This mode is similar to the userlogin-secure mode, except
that there can be more than one 802.1x-authenticated user
on the port.
userlogin-se
cure-oui This mode is similar to the userlogin-secure mode, except
that, besides the packets of the single 802.1x-authenticated
user, the packets whose source MAC addresses have a
particular OUI are also allowed to pass through the port.
When the port changes from the normal mode to this
security mode, the system automatically removes the
existing dynamic/authenticated MAC address entries on the
port.
macAddress
WithRadius In this mode, MAC address-based authentication is
performed for access users.
userlogin-se
cure-or-mac In this mode, the two kinds of authentication in
macAddressWithRadius and userlogin-secure modes can
be performed simultaneously.
In this mode, there can be only one authenticated 802.1x
user on the port.
userlogin-se
cure-or-mac
-ext This mode is similar to the userlogin-secure-or-mac mode,
except that there can be more than one authenticated
802.1x user on the port.
mac-else-us
erlogin-secu
re MAC authentication is performed first on the accessing user.
If the MAC authentication succeeds, the access user has the
accessibility; otherwise, 802.1x authentication is performed
on the access user.
In this mode, there can be only one authenticated 802.1x
user on the port.
mac-else-us
erlogin-secu
re-ext This mode is similar to the mac-else-userlogin-secure
mode, except that there can be more than one
authenticated 802.1x user on the port.
Table 129 Description of port security modes
Security
mode Description
Feature